follow us on social media
follow us on social media
DigiRail NXprog gathers the best of both, easy programming of Arduino community and industrial device reliability and robustness for automation applications. Its integrated I/O handles analog and digital signals, allowing DigiRail NXprog be used as an I/O extension of standard automation systems or as a brain of custom applications, with local and agile decision making.
Arduino compatible, DigiRail NXprog enables the use of high level programming languages such as C / C ++ that enable the user to implement complex algorithms such as recursive logic, state machines, statistical analysis and mathematical equations. This is an excellent advantage over the mid-level programming hardship (IEC standard) found on most PLCs in the global market, with a lower adherence by the new generation of automation technicians.
Access our Arduino library on GitHub:
Designed especially for harsh environments, DigiRail NXprog demystifies the use of Arduino compatible devices for the industry, being the perfect combination of ruggedness with easy programming. The RS485 interface allows communication with other Modbus RTU protocol devices, either as a master or slave. DigiRail NXprog also has Modbus TCP protocol through an Ethernet port, which increases the applicability of the equipment with SCADA management or control systems. Flexible for receiving protocols from Arduino community libraries or implementing custom protocols, DigiRail NXprog enables a variety of applications with machines or processes connectivity.
- Inputs:
?RAMIX: 4 digital and 2 analog (isolated)
- Outputs:
?RAMIX: 3 digital or 2 relay and 2 analog (isolated)
- Analog signals:
?Thermocouples J, K, T, N, E, R, S and B
?Pt100, Pt1000, NTC,
?0-60 mV, 0-5 V, 0-10 V, 0-20 mA, 4-20 mA
- Analog input impedance:
?0-60 mV, Pt100, Pt1000, NTC and thermocouples: >10 MΩ
?0-5 V, 0-10 V: >1 MΩ
?4-20 mA: 15 Ω + (1 V @ 20 mA)
- Digital Input characteristics:
?Logical level "0": < 0.5 V
?Logical level "1": > 3 V
?Maximum voltage: 30 V
?Input impedance:270 kΩ
?Input current: @ 30 Vdc (typical) 0.15 mA
?Maximum frequency (square wave):
?Dry contact: 10 Hz
?PNP: 250 Hz
?NPN: 250 Hz
- Digital Output characteristics:
?Maximum load current: 200 mA
?Short circuit current: 70 mA
?Maximum switching voltage: 30 Vdc
?Minimum switching voltage: 6 Vdc
- Relay Output characteristics:
?Type: SPST-NO and SPDT
?Maximum load current: 3 A (SPST) / 6 A (SPDT)
?Switching voltage: 250 Vac
?Suitable for resistive loads
- Analog Output characteristics:
?Signal types: 0-20 mA, 4-20 mA, 0-10 V
?Maximum load: 0-20 / 4-20 mA: ≤ 500 Ω
?0-10 V: ≥ 2000 Ω
- Analog Channel resolution:
?Analog inputs: 16 bits (65000 levels)
?Analog outputs: 12 bits
- Communication interface:
?USB
?Ethernet: 10/100 Mb/s, IEEE standard 802.3u
?RS485
- Software:
?NXperience (via USB)
- Power Supply:
?Voltage: 10 Vdc to 36 Vdc
?Maximum Consumption: 5 W
?Typical Consumption: 20 mA
- Operating conditions:
?Temperature: -20 to 60°C ( -4 to 140°F)
?Humidity: 5 to 95% RH, non-condensing
- Enclosure: ABS+PC
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
?/p>
10/11/2022
5/31/2021
DigiRail NXprog was designed to withstand hostile environments while being an easy to use product. It proves that it is possible to combine Arduino compatible devices with industrial environments.
8/28/2020
This on-line meeting is free and takes place on September 3rd. It will be held at two different times, so you can choose the one that best fits your time zone.
5/14/2020
DigiRail NXprog was designed to withstand hostile environments while being an easy to use product. It proves that it is possible to combine Arduino compatible devices with industrial environments.
